Excessive temperatures will severely damage the CPU and system. If you install two hard disks, you must configure the second drive as a slave device by setting its jumper accordingly. Failure to switch off the DC power supply may result in serious damage to your system or memory module. The available setting values are Disabled, Power off, Suspend. IrDA Header optional Please refer to the physical motherboard. The setting values are Disabled and Enabled.

Uploader: Sazahn
Date Added: 22 November 2010
File Size: 20.60 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 66070
Price: Free* [*Free Regsitration Required]

Secure the card to the chassis with the screw you removed earlier. Users should read the auduo contents carefully prior to modifying any jumper settings.

Foxconn 661fx7mf Audio Drivers

MONO Monochrome adapter, including high resolution monochrome adapters. It has the benefit of being backwards-compatible with ATA and ATAPI devices, and offers a thin, small cable solution, as seen in the photo on the right. The system boot will not stop for a diskette error; but it will stop for all other errors.

System Fan Connector Although the information in this manual auio be changed or modified at any time, Foxconn does not obligate itself to inform the user of these changes.


Video shadow will increase the video speed. While the User password can be used to view the current CMOS settings, these settings cannot be modified using the User password.

Foxconn fx7mf Audio Drivers

However, if the optimized performance parameters are not supported by your hardware devices, it will likely cause system reliability and stability issues. Unplug the power cord before opening your chassis or touching any component.

This section explains how to use the various functions of this motherboard by changing the jumper settings.

The power supply should turn off after Windows shuts down. This chapter includes the following information: Disabled and 1 Min – 1 hour. Memory Hole at 15MM Default: Description of Jumpers 1. It’s a community-based project which helps to repair anything. The Microphone jack is used to connect to the microphone. Alternatively referred 66f1x7mf-s as a bus slot or expansion port, an expansion slot is connection or port located inside a computer on the motherboard or riser board that allows a computer hardware expansion card to be connected.

Foxconn 661FX7MF-S – motherboard – micro ATX – LGA775 Socket – SiSM661FX

Be sure your selection is right. In other ajdio, it is a standard that describes how computer components work together to manage system hardware. Other AGP cards manufactured by other vendors may not be suitable for this motherboard. Day of Month Alarm This option is used to set the timing for the start-up day of the month.


Installing an expansion card 1.

The system then runs the poweron tests. CPU Fan Connector Ensure that the DC power supply is turned off before inserting or removing expansion cards or other peripherals, especially when you insert or remove a memory module.

The setting values contain 0 – Homepage Click here to visit Foxconn motherboard homepage. The plastic clips at both sides of the DIMM socket will lock automatically.

INTR The connector connects to the chassis security switch on the case. After applying power Led on the system front panel audii lights up.

Video The following table is provided for your reference in setting the display mode for your system. You have to run the Setup 616fx7mf-s when the following cases occur: