I haven’t a clue to the difference. L Don’t worry about the lower UI version it works better than 0. What I got after installing your drivers and did not have in the original drivers: There may or may not be an improvement. By the time you get home the custom b drivers will be ready.

Uploader: Zuk
Date Added: 17 April 2008
File Size: 16.40 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 3337
Price: Free* [*Free Regsitration Required]

Hi, Dont know if you have sorted the adapter out now, but I had the same troubles.

Is there some sort of incompatibility controp this presario and the chipset? I installed step for step how the installation cd told me to and I even went online and downloaded the latest driver.

Windows 10 Home Premium 64bit sp1. Welcome to Windows 7 Forums. The Skyworks L alone being rated for 26dbm operation.

Which adapter to choose depends on what your needs are. In any event, It is a completely different chipset with a different driver package. The adapter comes with an RP-SMA antenna connector so that you can add an external antenna to boost your wireless range and signal. Alright i know a way to modify TX power in Linux but i don’t think that’s even possible on Windows 8. Message 10 of The only drivers I could get to work properly were the ones from Realtek.

Is the Device in error in Device Manager? Do you already have an account?


Solved: ALFA AWUSH USB network adapter problems – HP Support Community –

Includes a 5dBi Rubber Duck Antenna. Power is not the be and end all of assessing adapter quality. The power is artificially low for a reason of being a “good” neighbour hehe.

Thank you for very fast answer, and i wonder why no one else didnt answerd, because on forum there is not even the similar topic.

Anyway, neither one of them are working for me.

You should disconnect the device. Oower discovered signal is one thing, connecting to it is another. I read rokland testing,and i didnt know that b is mw because on housing is number 1 which represent mw, since neither you nor I have devices to measure adapter strenght i assumed that my adapter have mw,thank you for info.

And is the only adapter that supports all 6 wireless modes under Linux. Three different adapters reacted the same when plugged into any of the USB ports. Rightclick on the five-bar wireless connection in bottom-right System Tray, select Confrol which actually works in Win7.

How to set tx power UP (increase tx power) in Windows 7

I suspect the voltage drop on the 10m active USB extension is too much for the L’s newly flashed power requirements All it says is “Checking Status”. By using our site, you acknowledge that you have read and understand our Cookie PolicyPrivacy Policyand our Terms of Service. I tested these high power levels on my USB active repeater cable far away from the desktop machine 10m away in another room, and the power level at least in the L’s case scales back to 5dbm protecting itself against undervoltage and choking the adapter’s scan of available AP’s.


Message 5 of You might be able to manually set a power over 17dbm ignoring the slider, however I’ve not noticed much if any difference past this figure, in any case, those are the EEPROM limits when edited with MPK at least for the L.

By clicking “Post Your Answer”, you acknowledge that you have read our updated terms of serviceprivacy policy and cookie policyand that your continued use of the website is subject to these policies. OK, This is my first post, so go easy on me.!

Hopefully it will fix this. I have a different brand wireless USB adapter with the same Realtek wireless device that would not accept any netwrk from Windows or the CD that came with the product.