The images of Russian antitank mine type TMM. As previously mentioned, the induction loop of the metal detector was located on the butt end of the antenna of the ground penetrating radar, which provides spatial coincidence of received images from two channels of the mine detector. Mock-up of MiRascan mine detector. In the overwhelming majority of cases er for the ground exceeds the analogous value for the blasting charge. The lowest value of the range is related to absolutely dry sand, which is found in the desert. The operator via the remote control box, connected to the cart by the cable of 15 m length, exercises control over the movement of the mine detector.
|Date Added:||16 July 2005|
|File Size:||56.93 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The operator via the remote mirasccan box, connected to the cart by the cable of 15 m length, exercises control over the movement of the mine detector. It amounts up to 10 mW, which provides for the complete safety of staff.
Microwave images of mine mock-ups in the examined lane with sandy soil. The antitank mines have diameter of about mm, and the average diameter of the anti-personnel mine amounts to 75 mm.
Benq MiraScan 3300U 4.03U10
The images of MS-3 booby trap in chernozem. The images of two PMN-2 antipersonnel mines in chernozem.
Thus, relative permittivity er for the typical explosives is between 3. MiRascan ground-probing holographic radar that makes it possible to detect and identify slightly deepened up to 20 cm objects by their shape has been developed in the Remote Sensing Laboratory. In the initial segment of this work, the mock-up of a wide-span mine detector MiRascan, which included, in the capacity of a detecting element, a five frequencies ground penetrating radar receiving signals in two crossed polarities.
Mock-up of MiRascan mine detector. At the same time dielectric properties of the ground in the considered frequency range vary within a wide range from 2. On the lower flange of the GPR cylindrical antenna, the head of the metal detector was installed; On the upper flange of the radar antenna, a generator metal detector block was installed; On the axes of chassis front wheels of the mine detector the electrical motors working in the impulse mode were installed; Remote control system of the mine detector movement was assembled.
A general view of the newest model MiRascan mine detector being used during experiments is presented in figure. The images of glass and plastic bottles filled with water in sand.
Download mirascan 3 driver | mirascan 3 driver
The images of Russian antitank mine type TMM. The minefields are combined as a rule, which means that they include both antitank and anti-personnel mines.
As previously mentioned, the induction loop of the metal detector was located on the butt end of the antenna of the ground penetrating radar, which provides spatial coincidence of received images from two channels of the mine detector. Diagram of mines arrangement in the proving ground.
Download mirascan 4.0 3 driver
Basic features of it were as follows: Some mirascab of the mines contain practically no metal, which substantially impedes their detection. Power emitted by the generator on each frequency is switched in sequence. In the course of further research, the mirascab of the mine detector MiRascan underwent modernization. In this case the key give-away factor lies in the blasting charges of the mines, the dielectric properties of which differ from analogous characteristics of the ground that covers them.
In the overwhelming majority of cases er for the ground exceeds the analogous value for the blasting charge. The principle of the multifrequency sounding of the condensed media construction structures, soils, etc. The major part of the mines has round cross-section view. The detector’s sensor was installed on the cart, which was set in motion by an operator manually.
The frequency switching rate is such that it provides mirascah the spatial matching for all microwave images of the GPR separate frequencies and metal detector image.
Benq MiraScan U U10 (free) – Download latest version in English on phpnuke
The radar has five operational frequencies in the range from 1. Its signals are received in two polarizations. Operating frequency of the metal detector is 2 MHz, and the diameter of the induction loop is equal to mm.
The successive reception of signals on each frequency and in both polarizations of GPR and from the metal detector is conducted in the process of scanning the ground surface. The lowest value of the range is mirasczn to absolutely dry sand, 4.0 is found in the desert.